English
中文简体
Friction plates are consumables that can cause various damage problems over time. Do you guys who often drive cars encounter similar situations?
Analysis on the Damage of Automobile Brake Pads
1. Is there any problem with the quality of friction discs? Generally, fake and inferior automotive friction discs are not resistant to wear due to the use of fake and inferior materials, and their service life will be very short.
2. It is generally recommended to find a technical professional for vehicle maintenance and replacement. Unauthorized replacement can cause problems such as untimely contact and poor gap adjustment, which can harm the application.
3. The habits of drivers, improper application of the brake pedal by ordinary drivers, and frequent braking systems are also key factors that cause the friction pads of automobiles to wear very easily.
4. Overload, continuous and safe driving on new roads, is also one of the factors leading to the wear of automotive friction plates.
Inspection Procedures for Brake Friction Plates
1. Before conducting a gradual inspection, make sure that the parking brake, parking brake, and roadside parking brake system for passenger vehicles are not applied, and secure the vehicle so that the wheels cannot be moved.
2. Remove the sealing cap and use a ratchet wrench to rotate the adjusting anchor bolt in the opposite direction to loosen the friction plate.
Remove the friction plate, select 4 points with uniform circumferential distribution for accurate measurement, and avoid areas where burrs and wear are relatively severe.
3. Check whether the wear of the brake lining is uniform, and use a micrometer to select 8 points with uniform circumferential distribution for accurate measurement.
If the wear is uneven, check whether the rolling action of the brake caliper on the sliding pin is normal, and whether there is dust between the friction plate bottom plate and the overall push plate.
If there is a problem with your car's friction plate, go and replace it quickly.
